The Effect of Polishing Techniques on Surface Roughness of Two Different Denture Base Materials
DOI:
https://doi.org/10.32828/mdj.v18i2.923Keywords:
Surface Roughness, PMMA, Polyamide, Finishing, Surface Roughness; PMMA; Polyamide; Finishing; PolishingAbstract
Background: Regarding acrylic resin, a direct link was found between surface roughness, plaque buildup, and microbial adhesion. However, the current polyamide material's surface characteristics are still debatable, especially after utilizing conventional polishing and finishing techniques. Heat curing acrylic resin makes it easy to evaluate the surface characteristics of each material and to follow advice for the best practices.
Objectives: The aim of the current study is to evaluate and compare the surface Roughness of heat cure acrylic resin and flexible acrylic resin materials before and after different surface treatments.
Material and Method: A total of (80) sample were prepared. These samples were divided into two main groups (made from heat cure acrylic resin and flexible acrylic resin). Each group contains (40) samples and were divided into four additional groups according to the surface’s polishing treatment. Each group of material have (10) specimens, the first group was polished with pumice, the second groups were polished with pumice and then glazed, the third group was polished with investment (Phosphate bonded investments) and then glazed, and the fourth group was glazed. A digital surface roughness tester meter (TR: 220) device was used to indicate the values of the roughness of specimens before and after surface polishing treatment.
Results: The result of surface roughness of heat cure acrylic resin using t-test analysis revealed that a significance difference among all the study groups (p< 0.05). The result of surface roughness of flexible acrylic resin using t-test analysis revealed that a significance difference was reported between all the study groups (p< 0.05).
Conclusion: It was concluded the surfaces roughness was decreased in the control group of (heat cure acrylic resin and flexible acrylic resin materials) when polished with pumice, while it was increased in the experimental groups after polished with glaze material. Compared to pumice and burning investment materials, the polishing material (light cure glaze) is noticeably rougher.
References
Hassan H Q, Mohammed A K. Effect of Denture Adhesive on Micro hardness and Surface Roughness of Different Denture Base Materials (2020). JODR,7(2) ,41-47.
Nimer AM, Jassim RK. Studying the Effect of Ascorbic acid on some properties of Autoclave and Heat cure denture base material (2020) p j m h s, 14(4), 1714-1718.
Badr WE, Sakr HM, Masoud MA, Quassem MA.Comparative study of some properties of flexible and conventional heat-cured acrylic resin denture base material (2018) AJDS, Vol. 21- No. 1- 87:91.
Shinawi L. The effect of denture cleansers on the hardness of denture base resins, polyamides and copolymers (2017) Review Article. EC Dental Science, (10), 110-9.
Lowe LG. Flexible denture flanges for patients exhibiting undercut tuberosities and reduced width of the buccal vestibule: a clinical report (2004) The Journal of prosthetic dentistry, (92), 128-131.
AL-takai IF. The effect of different disinfectant solutions on shear bond strength of acrylic teeth to flexible denture base material (2014) AL-RAFIDAIN Dental Journal, (14), 145-152.
Constantinescu IR, Ursache M,Mardarez D. Effect of pH on the surface roughness of heat-cured denture base acrylic resins (2007) Revista medico-chirurgicala a Societatii de Medici si Naturalisti din Iasi, (111), 477-481.
Darwish M, Nassani MZ. Evaluation of the effect of denture adhesives on surface roughness of two chemically different denture base resins (2016) European Journal of Dentistry, 10, 321.
Rapone B, Pedone S, Carnevale A,Plantamura P, Scarano A,Demelio A,Demelio GP,Corsalini M. Profilometer Comparison of the Surface Roughness of Four Denture Base Resins (2022 ) An In Vitro Study. Journal ,1837 (12), 1-11.
Dathan P, Jayakumar A, Chandrathara T K, Ismail S, Nampoothiri DP, Nair KC. the relevance of polishing acrylic dentures (2021) - an overview. acta scientific dental sciences, 5(5), 63-70.
Singh G, Agarwal A, Lahori M. Effect of cigarette smoke on the surface roughness of two different denture base materials (2019) J Indian Prosthodont Soc;19:42-8.
Chi YH. Effect of silica filler on the mechanical properties of silicone maxillofacial prosthesis (dissertation) (2014) Indianapolis (MI): Indiana University School of Dentistry.
Mukhlif OR. Studying the effect of adding a composite of silanized Nano.Al2O3 and plasma-treated polypropylene fibers on some physical and mechanical properties of heat cured PMMA denture base material (2015) M.Sc. Thesis, college of dentistry, university of Baghdad.
Yaseen IN. Effect of different surface treatments on the tensile bond strength between acrylic resin teeth and denture base material (2016) Iraqi Dental Journal, 38(3), 142-146.
Ulusoy M, Ulusoy N, Aydin AK. An evaluation of polishing techniques on surface roughness of heat and cold-cured acrylic resins (1986) J Prosthet Dent.; 56: 107-12.
EL-din MS, Badr AM, Agamy EM, Mohamed GF. Effect of two polishing techniques on surface roughness of three different denture base materials (2018) (an in vitro study). Alexandria Dental Journal. Vol.43 Pages:34-40.
Singh K,Gupta N. Injection molding technique for fabrication of flexible prosthesis from flexible thermoplastic denture base materials (2012) World J Dent, 3, 303-307.
Jaber MA. Evaluation the effect of burning investment and black sand materials on the surface roughness of acrylic resin denture base (2012) Iraq National Journal of Nursing Specialties, 25(2), 62-70.
Ahmad AS. Evaluation and compare between the surface roughness of acrylic resin polished by pumice, white sand and black sand (2011) Journal of K ERBALA University, 9(1),49-54.
Alnamel HA, Mudhaffer M. The effect of Silicon dioxide Nano-Fillers reinforcement on some properties of heat cure polymer thy l methacrylate denture base material (2014) Journal of Baghdad College of Dentistry, 26(1), 32-36.
Kuhar M, Funduk N. Effects of polishing techniques on the surface roughness of acrylic denture base resins (2005) J Prosthet Dent ;93: 76-85.
Abuzar MA, Bellur S, Duong N, Kim BB, Lu P, Palfreyman N, Surendran D, Tran VT. Evaluating surface roughness of a polyamide denture base material in comparison with poly methyl methacrylate (2010) Journal of Oral Science, Vol. 52, No. 4, 577-581.
De luna malheiros-segundo A, Pisani MX., Paranhos HDFO, De souza RF. Effect of a denture cleanser on hardness, roughness and tensile bond strength of denture liners (2008) Brazilian Journal of Oral Sciences, 7, 1596-1601.
AL-dharrab AA, Tayel SB, Abodaya MH. The effect of different storage conditions on the physical properties of pigmented medical grade I silicone maxillofacial material (2013) ISRN Dentistry.
AL-majeed AE. Evaluation of the effects of porcelanite, black sand and pumice on some properties of acrylic resin (2006) college of medicine and health technology/ M.SC.
Goiato MC, Sônego MV, Carneiro DDDA, Silva EV, Bonatto LD, Rangel EI. Evaluation of a glaze polishing technique for pigmented denture acrylic resin submitted to Thermo cycling and disinfection (2017) J Int Oral Health, 9(5), 213-221.
Sesma N, Laganá DV, Morimoto S, Gil C. Effect of Denture Surface Glazing on Denture Plaque Formation (2005) Braze Dent J, 16(2), 129-134.
Downloads
Published
How to Cite
Issue
Section
Categories
License
Copyright (c) 2023 Mustansiria Dental Journal
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
