Efficacy of silver diamine fluoride on immediate and delayed adhesive strength of resin composite to sound dentin of permanent teeth: an in vitro study
DOI:
https://doi.org/10.32828/mdj.v20i1.1148Keywords:
Universal test machine, Silver diamine fluoride, sodium fluoride, shear bond strengthAbstract
Objectives: How silver diamine fluoride affected the immediate and prolonged adhesive resin composite's resistance to sound dentin of permanent premolars. Procedures: Three groups were identified (total number=30). The manufacturer's recommendations were followed while applying adhesive resin to the dentin surfaces in Group A after they had been etched. In Group B and C, dentin surfaces were treated with silver diamine fluoride and 0.05% NaF respectively. Then etched and bonded as for the control group. Then resin composite build-ups were created. Following this, each group was divided into two subgroups (for each group n=5), subgroup 1 underwent a shear bond strength test by universal test machine after 24 hrs, subgroups 2 the test was done after thermocycling process (300 cycles). The mode of failure was also examined. Results: The type of dentin surface treated with SDF solution was significantly affect shear bond strength (p=0.000) for both periods (immediate and prolonged). However, there were no significant difference between NaF group and control group on shear bond strength (p<0.05) in immediate and prolong periods. On other hand there were statistically no significant differences between immediate and prolonged shear bond strength in SDF group (p=0.850),
NaF group (p=0.637) and control group(p=0.794) When dentin surfaces were treated with silver diamine fluoride , there were more adhesive failures not as 0.05% NaF and control group which showed more mixed failures. Conclusion: silver diamine fluoride significantly reduced bond strength of etch and rinse adhesive system. Pretreatment with NaF maintained the shear bond strength of the adhesive to dentin after 300 thermal cycles.
References
References
Surendranath P, Krishnappa S, Srinath S.(2022). Silver Diamine Fluoride in Preventing Caries: A Review of Current Trends. Int J Clin Pediatr Dent. 15(Suppl 2): S247–S251.
Knight GM, McIntyre JM.(2006). The effect of silver fluoride and potassium iodide on the bond strength of auto cure glass ionomer cement to dentine. Australian dental journal.51:42–5.
Selvaraj K, Sampath V, Sujatha V, Mahalaxmi S. (2016). Evaluation of microshear bond strength and nanoleakage of etch-and-rinse and self-etch adhesives to dentin pretreated with silver diamine fluoride/potassium iodide: An in vitro study. Indian J Dent Res.27:421–5.
Lutgen P, Chan D, Sadr A. (2018). Effects of silver diammine fluoride on bond strength of adhesives to sound dentin. Dent Mater J.37:1003–9.
Koizumi H, Hamama HH, Burrow MF. (2016) Effect of a silver diamine fluoride and potassium iodide-based desensitizing and cavity cleaning agent on bond strength to dentine. Int J Adhes Adhes.68:54–61.
Daneshkazemi AR, Davari AR, Ataei E, Dastjerdi F, Hajighasemi E. (2013).Effects of mechanical and thermal load cycling on micro tensile bond strength of clearfil SE bond to superficial dentin. Dent Res J (Isfahan).10:202–9.
- KHALIL, R. J. & AL-SHAMMA, A. M. (2015). Early and delayed effect of 2% chlorhexidine on the shear bond strength of composite restorative material to dentin using a total etch adhesive. Journal of Baghdad College of Dentistry, 27, 24-31.
- - Neri JR, Nojosal JS, Yamauti M, Mendonca JS, Santiago SL.(2017). Pretreatment with sodium flouride maintains dentin bond strength of two-step self-etch adhesive after thermal stressing. J Adhes Dent.19:517-523.doi: 10.3290/j.jad.a39619.
- Al-Shamma A and Al-Abbas M A F A.(2020). Hybrid Layer Thickness and Resin Tags Penetration of two Universal Adhesives Incorporated with Ascorbic Acid Coated Superparamagnetic Nanoparticles Subjected to External Magnetic F. International Journal for Pharmaceutical Research Scholars.
- Al-Qrimli A F,. Al-Shamma A M .(2016). Comparative Evaluation of the Effect of Different Universal Adhesives and Bonding Techniques on the Marginal Gap of Class I Composite Restoration (A SEM Study). J Bagh Coll Dentistry: 28(4):34-42).
- Farahat F, Davari A, Karami H.(2022). Investigation of the effect of simultaneous use of silver diamine fluoride and potassium iodide on the shear bond strength of total etch and universal adhesive systems to dentin.Dental Research Journal;19:6.
- Khalaf M and Jasim M.(2022). Comparison of Microleakage of Composite and Glass Ionomer Restorations in Primary Molars Pretreated with SilverDiamine Fluoride at Two Time Intervals: An in Vitro study. Dental Hypotheses ¦ Volume 13 ¦ Issue 4 ¦ October-December.
- Gupta J, Thomas MS, Radhakrishna M, Srikant N, Ginjupalli K.(2019) Effect of silver diamine fluoride-potassium iodide and 2% chlorhexidine gluconate cavity cleansers on the bond strength and microleakage of resin-modified glass ionomer cement. J Conserv Dent;22:201-6.
- Van Duker M, Hayashi J, Chan DC, Tagami J, Sadr A.(2019). Effect of silver diamine fluoride and potassium iodide on bonding to demineralized dentin. Am J Dent;32-143-6.
- Habeeb I A, Mahmood M Sh.(2021). Evaluation of the Effectiveness of 5% Sodium Fluoride (NAF) with Diode Laser 976nm for Treatment of Dentine Hypersensitivity. Medico-legal Update, October-December Vol.21, No. 4.
-Costa AR, Correr-Sobrinho L, Ambrosano GM, Sinhoreti MA, Borges GA, Platt JA, Puppin-Rontani RM.(2014). Dentin bond strength of a fluoride-releasing adhesive system submitted to pH-cycling. Braz Dent J 25:472-478.
- Pinto CF, Vermelho PM, Aguiar TR, Paes Leme AF, Oliveira MT, Souza EM, Cavalli V, Giannini M.(2015). Enamel and dentin bond strength, interfacial ultra-morphology and fluoride ion release of self-etching adhesives during a ph-cycling regime. J Adhes Dent 17:27-34.
- Al-Shamma A and Maryoosh.(2020). Shear bond strength of fluorinated grapheme nanoparticles modified dental adhesives. Modified dental adhesives, September ,Vol. 23 Issue 13B.
-Steiner R, Edelhoff D, Stawarczyk B, Dumfahrt H, Lente I.(2019).Effect of dentin bonding agents,various resin composites and curing modes on bond strength to human dentin.J Materials;12,3395.
- Sofan E., Sofan A., Palaia G., Tenore G., Romeo U., Migliau G.(2017). Classification review of dental adhesive systems: From the IV generation to the universal type. Ann. Stomatol; 8:1–17.
- CEVIK P, YILDIRIM A, ARTVIN Z, ÖZCAN M.(2020). Microtensile Bond Strength and Failure Type Analysis of Self-Etch Adhesive Systems on Superficial and Deep Dentin After Long-term Water Storage. Braz Dent Sci; Oct/Dec;23(4).
- Gomes MIRANDA G, Moreira da SILVA E, Flôres de OLIVEIRA M, SIMMER F. (2020). Resin-dentin bond stability of etchand-rinse adhesive systems with different concentrations of MMP inhibitor GM1489. J Appl Oral Sci. 28:e20190499.
- Abbood M H, Al-Hashimi R A .(2016). In Vitro Comparative Assessment of Composite Nanoleakage Using Various Dentine Surface Treatments. . J Bagh Coll Dentistry; 28(4):49-55).
-Chan D,Sadr A.(2018). Efeect of silver diamine fluoride of bond strength on adhesives to sound dentin.Dental Material Journal;37(6):1003-1009.
- Alhabdan A, Alrefeai M, Alkhudhairy F, Alhaqbani M, Naseem M.(2022). Assessment of Caries-Affected Dentin Adhesive Interface Treated with Contemporary Conditioning Techniques. Mary Ann Liebert, 20 Sep; vol(40).
Downloads
Published
How to Cite
Issue
Section
Categories
License
This work is licensed under a Creative Commons Attribution 4.0 International License.
This work is licensed under a Creative Commons Attribution 4.0 International License.
